tgimplacem


Product Details

Enquire about tgimplacem

Please, enter your name
Please, enter your phone number
Please, enter your e-mail address Mail address is not not valid
Please, enter your message

tgimplaCem is a Resin-based, Dual-luting semi-permanent implant cement.


Advantages

  • Passes through a plastic phase before final setting thus allowing easy, convenient &clean removal of excess cement.
  • Very low displacement resistance and thus extremely low film thickness.
  • Due to highly cross-linked, ductile polymer structure, high compressive strength and hermetic sealing are achieved.
  • Luted restorations are effortlessly removed without damage with standard devices (Crown Butler, Corona Flex).
  • Excess material can easily be removed in large pieces (no crumbling) during plastic phase.
  • Compatible with all conventionalmaterial combination, i.e.Zirconium and metal frameworks, ceramics, titanium.
  • Antibacterial, eugenol-free, odourless and tasteless; natural opaque colour for screening metallic abutments.

Instructions for use

  • Carefully check fit, occlusion and proximal contact points. Complete finishing procedures.
  • Bleed the syringe, insert the plunger in the body of the cartridge. Remove the cap and attach mixing cannula. Dispense the material with uniform pressure.
  • Apply a thin layer of tgimplaCem directly into the superstructure, carefully position the restoration on the implant abutment with slight pressure; then press down firmly.
  • Remove excess material during the gel/plastic phase, after around 2-3 minutes, with a suitable instrument.
  • The working time at room temperature is around 80 seconds. When tgimplaCem is used with translucent material s (e.g.Thin layers of ceramic provisionalcrownsandbridges),increase exposure tolightthrough the material to 30-40 seconds per surface.

Packing & Contents

1x5ml Syri nge, 10 Tips.




Document Downloads
tgimplacem

DataSheet Document
File Name: DS_tgimplacem.pdf
File Size: 387.14 kB
Downloads: 82
tgimplacem
 Hot